Product manual

Chapter 5: Management with the CLU
265
To change a value, highlight the item, press Backspace to delete the current
value and type a new value.
8. Highlight Save Settings and press Enter.
The new Portal is added to the list.
Making iSCSI Portal Settings
To make portal settings:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI Portals and press Enter.
The list of portals displays.
3. Highlight the portal you want to change and press Enter.
The portal information screen displays.
4. Highlight iSCSI Portal Settings and press Enter.
5. Make changes as needed.
• DHCP – Enabled or disabled
DHCP is currently supported only for IPv4.
• ProtocolFamily– IPv4 or IPv6
• PrimaryIP – Primary IP address of this portal
• PrimaryIPMask – Subnet mask of this portal
• VlanTag – VLAN tag number (0 to 4094) for portals associated with a
VLAN
• TrunkId – Trunk ID number (1 to 8) for portals associated with a trunk.
6. Highlight Save Settings and press Enter.
7. Press Y to acknowledge possible interruption of iSCSI services.
8. Press Y again to confirm the changes.
9. Highlight Return to Previous Menu and press Enter to return to the portal
list.
Deleting iSCSI Portals
To delete an iSCSI portal:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI Portals and press Enter.
The list of iSCSI portals displays.
3. Highlight the portal you want to delete and press the Spacebar to mark it.
4. Highlight Delete Marked Targets and press Enter.
5. Press Y to confirm deletion.