Product manual

Chapter 5: Management with the CLU
277
Working with LUN Mapping
LUN Mapping includes the following functions:
• Enabling LUN Mapping (page 277)
• Viewing a List Ports (page 277)
• Viewing a List Targets (page 278)
• Viewing a List of Initiators (page 278)
• Adding an Initiator (page 278)
• Deleting an Initiator (page 279)
• Viewing a List of LUN Maps (page 279)
• Adding a LUN Map (page 280)
• Editing a LUN Map (page 281)
• Deleting a LUN Map (page 281)
• Changing the Active LUN Mapping Type (page 282)
Enabling LUN Mapping
LUN Mapping must be enabled in order for VTrak to recognize an initiator.
To enable LUN mapping:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight LUN Mapping and press Enter.
3. Highlight one of the following options and press Enter.
• LUN Mapping: Intiators
• LUN Mapping: Ports
• LUN Mapping: Targets
4. Highlight Enable LUN Mapping (Currently DISABLED) and press Enter.
A “Logical drives may become invisible” message appears.
5. Press any key to continue.
6. Press Y to confirm.
LUN mapping is enabled.
Viewing a List Ports
To view a list of FC ports:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight LUN Mapping and press Enter.