Product manual

VTrak E-Class Product Manual

280

Adding a LUN Map

For FC systems, you can set up an Initiator or Port type LUN map.

For iSCSI systems, you can set up an Initiator or Target type LUN map.

You can set up both LUN map types on the same subsystem but only one LUN

map type can be active at a time.

A maximum of 1024 logical drives can be mapped to an FC initiator or port, or to

an iSCSI initiator or target.

To assign a LUN to an FC or iSCSI initiator, add the initiator first. See “Adding an

Initiator” on page 278.

LUN mapping must be enabled in order to map a LUN. See “Enabling LUN

Mapping” on page 277.

Mapping a LUN to an FC Initiator or Port

To map a LUN to an FC initiator or port:

1. From the Main Menu, highlight Additional Info and Management and press

Enter.

2. Highlight LUN Mapping and press Enter.

3. Do one of the following actions:

• Highlight LUN Mapping: Initiators and press Enter. Then highlight an

initiator and press Enter.

• Highlight LUN Mapping: Ports and press Enter. Then highlight a port

and press Enter.

A list of logical drives displays.

4. In the LUN field, press the backspace key to erase the current value, then

type the LUN you want to assign to this initiator, from 0 to 255.

Each logical drive can have only one LUN and must have a unique LUN.

If you make a error, press Control-AR to restore the current LUN.

5. Press Control-A to save the LUN map.