Product manual

Chapter 5: Management with the CLU
281
• Highlight LUN Mapping: Targets and press Enter. Then highlight a
target and press Enter.
A list of logical drives displays.
4. In the LUN field, press the backspace key to erase the current value, then
type the LUN you want to assign to this target, from 0 to 255.
Each logical drive can have only one LUN and must have a unique LUN.
If you make a error, press Control-AR to restore the current LUN.
5. Press Control-A to save the LUN map.
Editing a LUN Map
Editing a LUN map is the action of assigning a logical drive or LUN to an initiator.
By changing the assignment, you change the initiator’s access.
To edit a LUN map:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight LUN Mapping and press Enter.
3. Do one of the following actions:
• Highlight LUN Mapping: Initiators and press Enter. Then highlight an
initiator and press Enter.
• Highlight LUN Mapping: Ports and press Enter. Then highlight a port
and press Enter.
• Highlight LUN Mapping: Targets and press Enter. Then highlight a
target and press Enter.
A list of logical drives displays.
4. In the LUN field, press the backspace key to erase the current value, then
type the LUN you want to assign to this initiator, from 0 to 255.
Each logical drive can have only one LUN and must have a unique LUN.
If you make a error, press Control-AR to restore the current LUN.
5. Press Control-A to save the LUN map.
Deleting a LUN Map
Deleting a LUN map prevents the initiator from accessing the LUN while LUN
masking is enabled.
To delete a LUN map:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight LUN Mapping and press Enter.