Product manual

Chapter 5: Management with the CLU

311

Restarting the Subsystem

There are two methods for restarting the subsystem. Choose one of the following

procedures:

• Restarting the Subsystem (page 311)

• Restarting VTrak – SSH Connection (page 311)

• Restarting VTrak – Serial Connection (page 312)

Restarting VTrak – Telnet Connection

To restart the RAID subsystem:

1. From the Main Menu, highlight Additional Info and Management and press

Enter.

2. Highlight Shutdown or Restart and press Enter.

3. Highlight Option and press the spacebar to display Restart.

4. Highlight Submit and press Enter.

A warning message appears.

5. Press Y to continue.

The screen goes blank.

6. Wait about two minutes.

7. Re-establish your Telnet connection to the VTrak CLU.

See “Making a Telnet Connection” on page 207.

If you cannot re-establish a connection, wait 30 seconds and try again.

Restarting VTrak – SSH Connection