Product manual

VTrak E-Class Product Manual
322
Restarting a Subsystem
This function shuts down the subsystem and then restarts it.
To restart the subsystem:
1. Click the Administration tab.
2. Click the Subsystem Information icon.
3. Click the Shutdown/Restart button.
4. Click the Restart button.
5. Type the word “confirm” in the field provided.
6. Click the Confirm button.
When the controller shuts down, your WebPAM PROe connection is lost.
7. Wait no less than two minutes.
8. In your browser, click Logout in the WebPAM PROe Header, then log in
again.
If you cannot log in immediately, wait 30 seconds and try again.
Important
Do NOT turn off the power supply switches on the RAID
subsystem or JBOD expansion units.