Product manual

375
Chapter 8: Troubleshooting
This chapter contains the following topics:
• VTrak is Beeping (below)
• LEDs Display Amber or Red (page 377)
• CLU Reports a Problem (page 382)
• WebPAM PROe Reports a Problem (page 385)
• USB Support Reports a Problem (page 390)
• Enclosure Problems (page 391)
• RAID Controller Problems (page 395)
• Disk Array and Logical Drive Problems (page 400)
• Physical Drive Problems (page 399)
• Connection Problems (page 405)
• Power Cycling the Subsystem (page 409)
• Event Notification Response (page 410)
VTrak is Beeping
VTrak’s alarm has five different patterns, as shown below.
Figure 1. Audible alarm sound patterns
When you first power-up the VTrak, it beeps twice to show normal operation.
See pattern 1, in Figure 1.
The audible alarm sounds at other times to inform you that the VTrak needs
attention. But the alarm does not specify the condition.
When the alarm sounds:
• Check the front and back of VTrak enclosure for red or amber LEDs.
• If email notification is enabled, check for new messages.
.25s.25s.25s
.25s.25s
.25s.25s
.25s
.25s
.25s.25s
.5s
.25s
.5s
.75s
.75s
.25s
.75s
.25s
.75s
1s 1.25s
2.5s
3s
1x
2x
1
2
3
4
5
6s
s
8