Product manual

VTrak E-Class Product Manual
36
Management Path
Each VTrak RAID controller has one (1) Ethernet RJ45 management port
connector. See page 34, Figure 17.
To establish the management path:
1. Connect Ethernet cables between the network connector on both host PCs
or servers and the standard network switch.
See Figure 19.
2. Connect Ethernet cables between the Management port on both RAID
controllers to the standard network switch.
If you have multiple VTrak subsystems, repeat steps 1 and 2 as required.
Figure 19.iSCSI SAN management connections
Management port
on RAID controller 1
Host PCs or servers
VTrak RAID subsystem
Management port
on RAID controller 2
Network switch
Network connector
(motherboard or HBA)