Product manual

VTrak E-Class Product Manual
422
A physical drive page 0 settings have
been changed
No action is required.
A physical drive page 1 settings have
been changed (SATA drives)
A physical drive page 3 settings have
been changed (SAS drives)
Physical disk is marked as DEAD due
to removal
Replace the physical drive.
Physical disk is marked as DEAD due
to failure of reassign sectors command
Physical disk is marked as DEAD due
to PFA condition
Physical disk is marked as DEAD due
to forced offline state
Physical disk seen by partner controller
not seen here
Check and correct SAS connections.
Verify that SAS-to-SATA adapters are
installed on all SATA drives.
Single ported physical disk seen by
Partner controller not seen here
Install an SAS-to-SATA adapter on the
SATA drive.
Physical disk reported not ready Replace the physical drive.
PSU (Power Supply Units)
PSU is not inserted Reinstall the power supply unit.
PSU is off Turn on the power supply or plug in the
power cable.
PSU is on
No action is required.PSU is installed and turned on
PSU is functional and turned on
PSU is installed and turned off
Turn on the power supply or plug in the
power cable.
PSU is functional and turned off
PSU is malfunctioning and turned on
Replace the power supply unit.
PSU is malfunctioning and turned off
PSU has been removed
PSU 12V/5V/3.3V power is out of the
threshold range
Reported Event Corrective Action