Product manual
Chapter 3: Setup
43
Drive Status Indicators
The VTrak spins up the disk drives sequentially to equalize power draw during
start-up. After a few moments:
• The Power/Activity LED displays blue when a physical drive is present.
• The Drive Status LED displays green when the physical drive is configured
as a member of a disk array or as a spare. When the physical drive is
unconfigured, the LED is dark.
Steady means the LED is on.
Blinking means a regular on/off pattern.
Flashing means intermittent and irregular on/off pattern.
See the table on the next page.
Figure 2. Drive carrier LEDs
For more information on LEDs, see “Chapter 8: Troubleshooting” on page 375.
Drive Carrier LEDs
State Power/Activity Drive Status
Dark No drive in carrier Drive is unconfigured
Steady Blue Drive is present —
Flashing Blue Activity on drive —
Steady green — Drive is configured
Blinking green — Locator feature
Amber — Drive is rebuilding
Red — Drive error or failure
* Configured means the physical drive either belongs to an array or it
is assigned as a spare drive.
Drive Status
Power/Activity