Product manual

VTrak E-Class Product Manual
46
Accessing the MAC Address in the CLI
To access the MAC address in the CLI:
At the command prompt, type net -a list -v and press Enter.
The following information displays:
administrator@cli> net -a list -v
-------------------------------------------------------------------------------
ActiveCtrlId: 1 Port: 1
MaxSupportedSpeed: 1000Mbps LinkStatus: Up
ProtocolFamily: IPv4(Enabled) DHCP: Disabled
IP: 10.0.0.1
IPMask: 0.0.0.0
MAC: 00:01:55:61:18:65
DNS: 0.0.0.0
Gateway: 0.0.0.0
ProtocolFamily: IPv6(Disabled) DHCP: Disabled
IP: 2001::1
IPMask: ffff::
MAC: 00:01:55:61:18:65
DNS: ::
Gateway: ::
Accessing the MAC Address in the CLU
To access the MAC address in the CLU:
1. At the CLI command prompt, type menu and press Enter.
The CLU screen appears.
2. Highlight Network Management and press Enter.
3. Highlight IPv4 and press Enter.
The following information displays:
Active Controller Id: 1 Port Id : 1
Max Supported Speed : 1000Mbps Link Status : Up
Protocol Family : IPv4
Status : Enabled
MAC Address : 00:01:55:61:18:65
DHCP : Disabled
IP Address : 10.0.0.1
Subnet Mask : 0.0.0.0
Gateway IP Address : 0.0.0.0
DNS Server IP Address : 0.0.0.0