Product manual

Chapter 3: Setup

-------------------------------------------------------------------------------

CtrlId: 1 Port: 1

ProtocolFamily: IPv4(Enabled) DHCP: Enabled

IP: 192.168.10.94

IPMask: 255.255.255.0

MAC: 00:01:55:30:65:E9

DNS: 192.168.1.1

Gateway: 192.168.10.1

CtrlId: 1 Port: 1

ProtocolFamily: IPv6(Disabled) DHCP: Disabled

IP: 2001::2

IPMask: ffff::

MAC: 00:01:55:30:65:E9

DNS: ::

Gateway: ::

CtrlId: 2 Port: 1

ProtocolFamily: IPv4(Enabled) DHCP: Disabled

IP: 10.0.0.3

IPMask: 0.0.0.0

MAC: 00:01:55:30:65:E9

DNS: 0.0.0.0

Gateway: 0.0.0.0

CtrlId: 2 Port: 1

ProtocolFamily: IPv6(Disabled) DHCP: Disabled

IP: 2001::3

IPMask: ffff::

MAC: 00:01:55:30:65:D7

DNS: ::

Gateway: ::

3. Repeat steps 1 and 2 above but change -c 1 (controller 1) to -c 2 (contoller

2).

Making Maintenance Mode Settings – Manually under IPv4

You make these settings for one controller at a time.

To make maintenance mode settings:

1. At the command prompt, type net -a mod -m -c 1 -s " followed by:

• primaryip= and the IP address ,

• primaryipmask= and the subnet mask ,

• primarydns= and the DNS server IP address ,

• gateway= and the Gateway server IP address

" and press Enter.