Product manual

Chapter 3: Setup
55
Setting-up VTrak with the CLU
Setting up the VTrak in the CLU includes these actions:
• Accessing the CLU Quick Setup Menu (page 55)
• Making Subsystem Date and Time Settings (page 56)
• Virtual Management Port Settings (page 56)
• Making Virtual Management Port Settings – Automatically (page 56)
• Viewing Virtual Management Port Settings (page 56)
• Making Virtual Management Port Settings – Manually under IPv4
(page 57)
• Making Virtual Management Port Settings – Manually under IPv6
(page 57)
• Maintenance Mode Settings (page 57)
• Making Maintenance Mode Settings – Automatically (page 57)
• Making Maintenance Mode Settings – Manually under IPv4 (page 58)
• Making Maintenance Mode Settings – Manually under IPv6 (page 58)
• Exiting the CLU (page 59)
Accessing the CLU Quick Setup Menu
To access the Quick Setup menu in the command line utility:
1. At the administrator@cli> prompt, type menu and press Enter.
The CLU main menu appears. See Figure 3.
Figure 3. CLU main menu