Product manual

VTrak E-Class Product Manual
56
2. Highlight Quick Setup and press Enter.
The first Quick Setup screen enables you to make Date and Time settings.
Making Subsystem Date and Time Settings
To set the subsystem date and time:
1. Press the arrow keys to highlight System Date.
2. Press the backspace key to erase the current date.
3. Type the new date.
4. Follow the same procedure to set the System Time.
5. Press Control-A to save these settings and move to the Management Port
settings screen.
Virtual Management Port Settings
Making Virtual Management Port Settings – Automatically
Automatic settings require a DHCP server on your network. DHCP is currently
supported on IPv4 only.
Under Quick Setup, the Management Port IPv4 settings screen follows the
System Date and Time settings screen.
To enable automatic management port settings:
1. Press the arrow keys to highlight DHCP.
2. Press the spacebar to toggle to Enable.
3. Press Control-A to save these settings and move to the Management Port
IPv6 settings screen.
Viewing Virtual Management Port Settings
To view the current IP address and network settings when using DHCP:
1. Press the arrow keys to highlight DHCP.
2. Press the spacebar to toggle to Disable.
The following information displays:
IP Address : 192.168.10.85
Subnet Mask : 255.255.255.0
Gateway IP Address : 192.168.10.1
DNS Server IP Address : 192.168.10.11
3. Press the spacebar to toggle DHCP back to Enable.
4. Press Control-A to save these settings and move to the Management Port
IPv6 settings screen.