Product manual

Chapter 3: Setup
59
• If you made settings for Controller 2, move to the RAID Configuration
menu.
Exiting the CLU
To exit the CLU from the Quick Setup RAID Configuration menu:
1. Highlight Skip the Step and Finish and press Enter.
2. Highlight Return to CLI and press Enter.
This completes management port and maintenance mode setup. Go to “Logging
into WebPAM PROe” on page 60.
Note
If you want to configure your RAID system now, using the CLU,
see “Managing Disk Arrays” on page 229 for information about
your choices.