Product manual

Chapter 4: Management with WebPAM PROe

This chapter contains the following topics:

• Logging into WebPAM PROe (below)

• Choosing the Display Language (page 70)

• Perusing the Interface (page 72)

• Logging out of WebPAM PROe (page 74)

• Viewing the Storage Network (page 75)

• Managing Subsystems (page 76)

• Managing RAID Controllers (page 85)

• Managing Enclosures (page 92)

• Managing UPS Units (page 96)

• Managing Network Connections (page 100)

• Managing Users (page 102)

• Managing LDAP (page 108)

• Managing Background Activities (page 114)

• Managing Storage Services (page 124)

• Monitoring Performance (page 138)

• Managing Physical Drives (page 141)

• Managing Disk Arrays (page 148)

• Managing Logical Drives (page 162)

• Managing Spare Drives (page 172)

• Managing Initiators (page 177)

• Managing LUNs (page 180)

• Managing Fibre Channel Connections (page 184)

• Managing iSCSI Connections (page 188)

Logging into WebPAM PROe

1. Launch your browser.

2. In the browser address field, type in the virtual management port IP address

of the VTrak subsystem.

Use the IP address you set in the CLI (page 47) or CLU (page 55).

Example:

• WebPAM PROe uses a secure HTTP connection. . . . . . . . . .https://

• Enter the IP address of the VTrak . . . . . . . . . . . . . . . 192.168.10.85