Product manual
Chapter 4: Management with WebPAM PROe
85
Managing RAID Controllers
RAID controller management includes:
• Viewing Controller Information (below)
• Making Controller Settings (page 86)
• Viewing Controller Statistics (page 87)
• Locating a Controller (page 88)
• Viewing the Flash Image Information (page 88)
• Updating Firmware on a RAID Subsystem (page 89)
• Viewing Battery Information (page 89)
• Reconditioning a Battery (page 90)
• Making Buzzer Settings (page 91)
• Silencing the Buzzer (page 91)
Viewing Controller Information
To view controller information:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the controller you want, then click the View button.
Controller information includes:
4. Click the Advanced Information tab.
• Controller ID
• Readiness Status
• Power On Time
• Part Number
• Hardware Revision
• Cache Usage – Percentage
• Boot Loader Version
• Firmware Build Date
• Software Build Date
• Alias – If assigned *
• Operational Status
• SCSI Protocol Supported
• Serial Number
• WWN – Worldwide Number
• Dirty Cache Usage – Percentage
• Firmware Version
• Software Version