Instructions / Assembly

ManualsBrandsProMounts ManualsCeiling Fans52 in. WIFI 3-Blade Smart Ceiling Fan with Control and Light Kit (Works with Alexa and Google Assistant)

1

2

3

4

5

6

7

8

9

Table Of Contents

Fig 6

Fig 7

screw

Reinforcing piece

Fig 5

5. ATTACHING THE GSN BLADES

Step 1. Attach the blade to the ﬂywheel

using the screws with spring washer in

the bag as shown in ﬁgure 5.

Star screw into ﬂywheel.Repeat for the

two remaining screws.

Step 2. Repeat for the remaining blades.

Step 3. Make sure the blade is straight and

tighten each screws.

Blades

Screw

Screw

Fan housing

6. FAN HOUSING INSTALLASION

Step 1. Remove set of screws(8) from the top of the

motor assembly, and remove the reinforcing plate

and save its for later use

as shown in Fig 6

Step 2. Install the fan housing onto the coupling

and align the holes with holes in the coupling.

Step 3. Install the reiforcing plate onto the fan

housing and align the holes with the holes in the

fan housing.See Fig 7

See Fig 7

Step 4. rei-install the set of crews(6) which

were just removed,Tighten all screws securely.

See Fig 7

Noted: Be sure must install the blades

before installing the fan housing.

5