Users Manual

ProMystic FindersKeypers
Installing the Battery and Setting Modes
It is very easy to set the modes. This is done when you install
the battery. Turn on the receiver and when you install the
keyfob battery. When you install this battery you get a series
of initial signals or buzzes.
The first buzz sets the number of repeats
With the 3 side up you get the default 10 repeats
With the 2 side up you get the infinite repeats
With the 2 side up you get the infinite repeats
With the battery up, the receiver will count up by one
until you tip the transmitter over and it will stop
counting and that will be the number of repeats
The second buzz sets the ‘Dial Lock’ feature.
The Dial Lock feature is only enabled if the second buzz
in a 2. If you are programming a custom number of
buzzes, you must turn the electronics to the 2 side to
enable the ‘Dial Lock’ right after receiving the number
of repeat buzzes that you want.