Instructions / Assembly

PARTS LIST
QTY DESCRIPTION PART NUMBER
(1) TOP (WORKSURFACE)
(1) LEG- LEFT HAND 772946 (24" DEEP)
772948 (30" DEEP)
(1) LEG- RIGHT HAND 772947 (24" DEEP)
772949 (30" DEEP)
(2) SIDE FLAP 772937
(1) BACK (WITH DOOR)
(1) SEPTUM
HARDWARE BAG:
(4) SILVER SCREW (#10 X 3/4) F02886
(14) BLACK SCREW (#10-24 X 1/2) F09542
(4) LONG SCREW F03060
(2) GROMMET WITH LID PM0130
(2) TIE BRACKET 772950
(2) ELECTRICAL BRACKET MS0225
SILVER
SCREW
SEPTUM
(INSTALLED)
SEPTUM
(INSTALLED)
R05115 06/28/10
Turn the table right-side-up. Unlock the door, and open it.
Insert the SEPTUM into the BACK, attaching the slots into the
stirrups in the BACK.
Insert (2) GROMMETS into the worksurface.
Use the (2) TIE BRACKETS provided to gang tables together.
Use the (2) ELECTRICAL BRACKETS (attached with BLACK
SCREWS) to attach outlets and power cables to the inside of the
back.
Your table can be cleaned with a soft cloth and mild cleaner.
(See Detail) Using (2) SILVER SCREWS
(Use 4 on the larger tables), fasten the BACK
to the WORKSURFACE.
Lock the door, and turn the table upright.
Unlock the door.
(see below) Install SEPTUM into back, fitting
the notches on the SEPTUM over the hooks
in the BACK.