Instructions / Assembly

SILVER
SCREW
BLACK
SCREW
SHARED LEG
(non-handed)
SHARED LEG
(non-handed)
BACK PANEL
BACK PANEL
CORNER LEG
(with wire cover)
TOP
Place the TOP on a smooth flat surface, face down.
Make sure nothing is underneath to screatch the
top. A carpet is best, but you can also use the
carton that the desk came in.
Use the SILVER SCREWS to fasten the steel parts into the drilled holes in the top.
Use MACHINE SCREWS to fasten the steel parts into the threaded inserts in the top.
Use BLACK SCREWS to fasten the steel parts to each other.
MACHINE
SCREW
Before assembly, make sure that you have
everything you need- check your parts against
the parts list on the last page. If you are missing
anything, please call us at 1-800-621-8846.
ASSEMLY INSTRUCTIONS-
CORNER DESK
Tighten all the screws, and turn the Corner Station
righ-side-up. Position it where it will be used.