Installation Guide

SOAP DISPENSER

GETTING STARTED

BEFORE YOU BEGIN

Ensure that you have gathered all the required

materials that are needed for the installation.

We recommend consulting a professional if you are

unfamiliar with installing plumbing ﬁxtures. We

accept no liability for any damage to the sink,

countertop, or for personal injury during

installation.

Observe all local plumbing and building codes.

Unpack and inspect the product for shipping

damage. If any damage is found, contact our

Customer Relations team at prooxus@gmail.com.

PAGE 1
SOAP DISPENSER BEFORE YOU BEGIN GETTING STARTED We recommend consulting a professional if you are unfamiliar with installing plumbing ﬁxtures. We accept no liability for any damage to the sink, countertop, or for personal injury during installation. Ensure that you have gathered all the required materials that are needed for the installation. Observe all local plumbing and building codes. Unpack and inspect the product for shipping damage.
PAGE 2
SOAP DISPENSER INSTALLATION 3. Screw bottle onto body assembly shank. 1. Remove the bottle. Separate soap dispenser head from ﬂange body assembly. 2. Insert body assembly through selected hole in sink. Secure body to sink by screwing the mounting nut from the underside of the sink. Hand tighten only. 4. Pour in soap into the bottle opening. Reinsert soap head into top of the ﬂange.