HobbyKing Motordaten

2) Repeat the above operation to set various functions you need.
Remark: Can also set with programming panels optional accessories . Refer to specification of
programming panels for setting method.
1.
1.
1.
1. Brake:
Brake:
Brake:
Brake: turn
turn
turn
turn on/turn
on/turn
on/turn
on/turn off
off
off
off
Turn on: the propeller stops immediately when the throttle works under the smallest position.
Turn off: the propeller stops naturally when the throttle works under the smallest position.
2.
2.
2.
2. Battery
Battery
Battery
Battery types:
types:
types:
types: LiPo
LiPo
LiPo
LiPo or
or
or
or NiCd/NiMh
NiCd/NiMh
NiCd/NiMh
NiCd/NiMh
NiCd/NiMh- set protection point for NiCad/NiMh.
Lipo-set protection point for Lipo and detect numbers of battery automatically in the battery pack.
Remark: the choice of NiCad/NiMh battery will make the ESC automatically set the cutoff value of voltage
at 65% of factory defaults. The cutoff value can be modified through the function of protection
for low voltage in case of changes. Once the battery pack of NiCad/NiMh connects to the power,
the ESC will read its initial voltage. The voltage will used as a reference value for cutoff value of
voltage.
3.
3.
3.
3. Protection
Protection
Protection
Protection function
function
function
function of
of
of
of low
low
low
low voltage:
voltage:
voltage:
voltage: low/middle/high
low/middle/high
low/middle/high
low/middle/high
1) In case of Ni-xx battery pack: the cutoff value of voltage is 50%/65%/65% of the initial voltage of
battery pack under low/middle/high threshold value.
2) In case of Li-xx battery pack: the number of batteries can be calculated automatically. Users need not to
set anything except the types of battery. The ESC provides three optional gears for protection point of low
voltage: low(2.8V)/middle(3.0V)/high(3.2V)
For example: the protection cutoff voltage for low voltage is 11.2V as low /12.0V as middle/12.8V as high
in case of Li-po battery pack with four batteries and voltage at 14.8V .
4.
4.
4.
4. Recover
Recover
Recover
Recover to
to
to
to factory
factory
factory
factory default
default
default
default setting.
setting.
setting.
setting.
1) The factory default setting of ESC:
2) The brake: off
3) The types of battery: Lipo battery with automatic detection.
4) The cutoff value under low voltage: middle (3.0V/65%)
5) The angle of entrance in motor: automatic
6) Setting for accelerated startup: smooth
7) The setting Mode for helicopter: off
8) The frequency of working: 8kHz
9) Protection mode under low voltage: reduce power
5.
5.
5.
5. The
The
The
The angle
angle
angle
angle of
of
of
of entrance
entrance
entrance
entrance in
in
in
in motor:
motor:
motor:
motor: automatic/low/high
automatic/low/high
automatic/low/high
automatic/low/high
Automatic-the ESC detect the most suitable angle of entrance in motor automatically.
Low (7-22 degree) suitable for the setting of most motors with inner rotor
High (22-30 degree)-suitable for the setting of most motors with outer rotor and 6 poles or more than poles
Under most cases, the automatic angle of entrance is suitable for all motors. However, in order to increase
efficiency, we recommend using low angle of entrance in motors with 2 poles (generally inner rotor), and using
high angle of entrance in motors with 6 and more than 6 poles (generally outer rotor).
We
can set a high angle
of entrance for motors with higher rotate speed. Some motors need special angle of entrance.
We
recommend
using the angle of entrance recommended by motor producers or automatic detected angle of entrance in case of
uncertainty.