Owners manual

5 | P a g e
Step 3 – Unfold the
Clubhouse. Find the entrance
of the Clubhouse and align it
with the enclosure entrance.
Pull the Clubhouse over the
entire enclosure, poles, and
trampoline.
Step 4 – Lift each Enclosure Pole and Clubhouse upright. (Make sure the
Curved Section of the enclosure pole is facing outward). Insert the bottom end
of the Post into its corresponding T-Bracket Slot. This will allow the Enclosure
and Clubhouse to be completely erected from ground level. DO NOT use any
other method of assembly as it may result in personal injury and/or damage
to the trampoline and clubhouse. Repeat this process for the remaining
Upright Posts.
Step 5 – Secure the Enclosure Poles to the Frame by attaching the
bolts and nuts that were removed in step 1 through the T-Brackets.