Manualshelf

User Manual

ManualsBrandsPropellerhead ManualsAudio SoftwareRecord 1.5 PC / MAC - AUDIO PRODUCTION SOFTWARE
141142143144145146147148149150
Table Of Contents
RECORDING IN THE SEQUENCER
141
5. Select the instrument track, in this example the ID8 1, so that it has Master Keyboard Input (red frame around
the device icon) and disable the “Record Enable” button.
Select the ID8 1 track and disable the Record Enable button.
6. Locate the audio track and record enable it by clicking the Record Enable button.
Engage Record Enable on the Disk Channel track.
! Don’t set Master Keyboard Input to the audio track - only click the “Record Enable” button on the audio track!
This way, the ID8 1 instrument track will still have Master Keyboard Input.
7. Play the master keyboard and set the input level to the audio track by adjusting the Level Fader on the ID8 1
Mix Channel strip in the mixer.
Adjusting the instrument’s level to the audio track.
! A Volume setting of -0.0 dB on the instrument device and a Level Fader setting of -0.0 dB on its corresponding
Mix Channel strip in the mixer is often the optimal setting to avoid audio signal clipping. As when recording ex-
ternal audio, it’s the track’s Input Meter that should be observed for any clipping.
8. Start recording audio on the audio track according to the description in “Recording audio”.
q By using the recording method described above, it’s also possible to record the audio from previously re-
corded note clips on instrument tracks.