User Manual

RECORDING IN THE SEQUENCER
148
The “New Alt” function
The “Alt” function creates additional record enabled note lanes on which you can record alternative takes. At the
same time, the previous note lane will be muted. Only the most recently added note lane will play back.
! Note that if Loop is activated and the Song Position Pointer is between the Locators, the clips between the Lo-
cators will be muted (instead of the lanes).
Here are two examples where the “Alt” function has been used:
The “Alt” function used for creating two additional lanes for alternative takes. Loop mode is Off.
When using the “Alt” function with Loop mode off, the previous note lane will be automatically muted.
The “Alt” function used for creating two additional lanes for alternative takes in Loop mode.
When using the “Alt” function in Loop mode, the clips between the locators will be muted - not the entire note lane. If
the locators are placed over an existing clip, as in the example above, clicking the “Alt” button in Loop mode will split
the clip and mute the clip between the locators.
q Creating a new note lane using the “Alt” button can also be done on-the-fly while recording.
Muted note lanes
Muted note clip
Split and muted note clip