User Manual

ARRANGING IN THE SEQUENCER
166
Masked events in note and parameter automation clips
In the picture below is an open note clip in Edit Mode with notes and performance controller events, before and after
resizing the clip:
After resizing the clip from 8 to 4 bars, all events that begin in bars 5-8 are now masked and won’t play back. All
masked events will still be there - and follow along with the clip if the clip should be moved, cut or copied.
Masked events will be a blue color on the Note Edit Lane, to indicate that they won’t play back. The first three-note
chord in the masked area is still an orange color. That’s because the notes begin in bar 4 (just before the downbeat)
and thus will play back in their entirety, also after resizing the clip.
Masked performance controller events, parameter automation events and pattern automation events will be inactive
- but could still affect the masked clip (see “About masked performance controllers and automation events” below).
Outside a masked clip, the controller/parameter/pattern values will default to their Static Values in the masked area
(see “Static Value Handles”).
! Note that just switching to Edit Mode won’t show masked events. A clip has to be opened before you can view
these events. You can remove all masked note and parameter automation events using the “Crop Events to
Clips” function on the Edit menu (see “The “Crop Events to Clips” function”).
Masked
events
An 8-bar note clip with notes and
performance controller events
The same note clip resized to 4 bars
Clip start
Clip start
Clip end
Clip end