User Manual

WORKING WITH THE RACK
291
q It’s also possible to move devices to a new rack column to the left or right of the original rack (see “Creating
new rack columns”).
In this example an RV-7 reverb device (Record+Reason) is moved to two different destinations:
4. Release the mouse button.
The device(s) are moved to the new position and the other devices in the rack are adjusted to fill up the gaps.
! Note that if you start to move a device but change your mind, you can abort the operation by pressing [Esc]
while keeping the mouse button depressed.
D If you hold down [Shift] when you move a device, Record will attempt to automatically re-route it.
See “Automatic routing” for more info on auto-routing.
! Moving devices in the rack does not affect the order of the sequencer tracks or channel strips and vice versa. If
you want the sequencer tracks and channel strips to be re-ordered as well, see “About the “Sort Selected De-
vice Groups” function”.
In this case, the red line
indicates that the RV-7
reverb device will be
inserted to the left of
the phaser.
This is the result. Note
that the filter device is
moved to the left, to fill
out the gap.
In this case, the red line
indicates that the reverb
device will be inserted to
the right of the chorus/
flanger.
This is the result. All three
devices are moved to the
left, to fill out the gap.