User Manual

ROUTING AUDIO AND CV
327
About the “Scroll to Connected Device” function
It’s possible to scroll directly to a connected device as follows:
1. Click and hold (or right-click (Win) or [Ctrl]-click (Mac)) on a connector.
A pop-up menu appears.
2. Select “Scroll to Connected Device” from the pop-up menu.
The device in the other end of the cable will be scrolled into view in the rack.
Cable color
To allow for a better overview of the connections in the rack, the cables have different colors:
• Audio connections between instrument and mixer devices are different shades of red.
• Connections to and from effect devices are different shades of green.
• CV connections are different shades of yellow.
• Combinator connections are blue.
Automatic routing
Auto-routing enables the automatic routing of cables between devices according to certain rules. Auto-routing is per-
formed under the following circumstances:
• When you create a new (Empty) Song, the Master Out L & R on the Master Section device are by default con-
nected to Outputs 1 & 2 of the Record Hardware Interface.
• When a new device is created.
• When moving, duplicating or pasting devices with [Shift] pressed.
• When selecting “Auto-route Device” from the Edit or context menu, with one or several devices selected in the
rack.
• Audio input signals from the Record Hardware Interface to the audio tracks in the sequencer are automatically
routed “in the background”.
When applicable, auto-routing is performed in stereo.
Yellow cables
indicate CV
connections.
Red cables indicate connections
between instrument and mixer
devices.
Green cables indicate effect device connections.