User Manual

ROUTING AUDIO AND CV
329
Routing as a Main Mixer Master Section send effect
• When you have the Master Section device selected and create an effect device, it will be automatically con-
nected as a send effect to the first available Send FX connectors on the Master Section device. See “Creating
Send effects”.
q It’s also possible to use the “Add Send FX” function to add effect devices or Effect Combi patches as send ef-
fects in the Master Section - see “Creating Send effects”.
Routing directly to another device
• When you have an instrument device selected and create an effect, that effect will be connected as an “insert”
effect between the instrument device and the Mix Channel/mixer device.
Examples of effects that work well as insert effects are distortion, compression and modulation effects.
Routing as a send effect to a mixer device
• When you have a mixer device (the Mixer 14:2 or Line Mixer 6:2) selected in the rack and create an effect de-
vice, it will be automatically connected as a send effect (to the first free Aux Send/Return jacks).
Auto-routing of CV/Gate signals
The Matrix Pattern Sequencer (Record+Reason)
• When you have an instrument device (Subtractor/Thor/Malström/NN-19/NN-XT/Combinator) selected and
create a Matrix Pattern Sequencer, the Note and Gate CV signals will be auto-routed to the instrument device.
The Matrix Note and Gate CV outputs are automatically connected to the Sequencer Control CV and Gate inputs
on the instrument device, respectively.
The RPG-8 Arpeggiator (Record+Reason)
• When you have an instrument device (Subtractor/Thor/Malström/NN-19/NN-XT/Combinator) selected and
create an RPG-8 Arpeggiator, the Note CV, Gate CV, Mod Wheel and Pitch Bend signals will be auto-routed to
the instrument device.
The RPG-8 Note CV and Gate CV outputs are automatically connected to the Sequencer Control CV and Gate in-
puts on the instrument device, respectively. The RPG-8 Mod Wheel and Pitch Bend outputs are automatically con-
nected to the Modulation Inputs Mod Wheel and Pitch Bend inputs on the instrument device, respectively.
Auto-routing devices after they have been created
Some additional rules regarding auto-routing devices that are already in the rack:
D To reroute a device already in the rack, you can select it and choose “Disconnect Device” and “Auto-route De-
vice” from the Edit menu or context menu.
When you use “Auto-route Device” it will be connected in a logical way according to its current location in the rack.
• If you delete a device connected between two devices, the connection between the two remaining devices is
preserved.
A typical example might be if you have an effect device connected between an instrument device and a Mix Chan-
nel device. If you delete the effect device, the instrument device will be re-routed directly to the Mix Channel de-
vice.
• When you move a device in the rack, the connections are not affected.