User Manual

THE MAIN MIXER
345
Duplicating channels
D To make a duplicate copy of a mixer channel, with its settings and Insert FX (if any), hold down [Ctrl](Win) or
[Option](Mac) and drag the channel to where you want it.
Several selected channels can be duplicated. You can also select “Duplicate Channels and Tracks” functions on
the Edit menu or mixer context menu.
D If the “Auto-group Devices and Track” option is activated on the Options menu, this will duplicate the chan-
nel’s entire Device Group, including tracks and clips - see “About Device Groups”.
Copy channel settings
If you wish to copy mixer channel settings from one channel to another you can use this function.
1. Select the channel you wish to copy settings from.
Copy channel settings only works when a single channel is selected, if several (or no) channels are selected the
function is not available.
2. Select “Copy Channel Settings” functions on the Edit menu or channel context menu.
On the submenu you can select to copy channel settings from a single section (EQ, Insert FX, Dynamics, or FX
Sends), or “All”, which copies everything including any Insert FX devices with their settings.
3. To paste the settings, select the channel you wish to copy channel settings to, then select “Paste Channel Set-
tings” on the Edit menu or mixer context menu.
The type of settings you copied will be reflected in the paste menu item, e.g. “Paste Channel Settings: EQ” if you
only copied the EQ section.
D The copied channel settings remain on the clipboard (until you cut or copy again) so you can paste them to
other channels if you so wish.
This can only be done with one selected channel at a time - pasting channel settings is not possible if several
channels are selected.
D Copying channel settings can also be done by selecting an Audio Track or Mix Channel device in the rack.
The procedure is the same. You can copy settings from a device to a mixer channel or vice versa.