User Manual

THE MAIN MIXER
353
D Loading Insert FX patches is done using the patch browser located at the bottom of the Insert FX section.
Insert effects patches in Combinator format can be loaded.
• See “Insert FX” for descriptions of how to work with Insert effects.
• Assigning parameters to the Rotary controls and buttons is done in the Programmer section of the rack device.
• Creating your own Insert FX patches is done in the Combinator
The Inserts section in the channel strip contains the following parameters:
FX Sends section
Send effects are global for all channels in the Main Mixer and are connected to the Master Section rack device. Up
to 8 Send effects can be used simultaneously. For a description of how use Send effects, see “Send FX”.
The Send section contains the following parameters:
|
Parameter
|
Description
Bypass Bypasses the loaded Insert effect.
Rotary knobs 1-4/
Buttons 1-4
The four rotary controls and buttons are programmable and provide control over selected parameters and functions in
an effect patch. Assigning parameters to the controls is done in the Programmer for the Audio Track or Mix Channel
device - see “Insert FX”.
Patch browser This is a standard patch browser for channel Insert FX where you can select/save patches in the Combinator Effect
patch format.
Edit Inserts This will bring the channel’s rack device into view with its Insert FX container opened, allowing you to edit the effect de-
vices.
|
Parameter
|
Description
FX Send On 1-8 Activates the Send for the channel.
Level 1-8 The Send Level knobs control the amount of channel signal that is to be sent to the effect connected to the corre-
sponding Send.
PRE button Send channel output is normally taken post channel fader, so that changing the channel's volume also changes the
send level. By activating the PRE button, the send output is taken pre channel fader. In this mode, the send level is in-
dependent of the channel fader.