User Manual

THE MAIN MIXER
364
2. Navigate to an Effect Combinator patch and select it.
Effect Combinator patches can be found in the Effect Patches folder in the Record Sound Bank.
3. Click “OK” to load the selected patch in the Insert FX section.
The Effect Combinator is loaded and patched in the Insert FX container in the channel's rack device, so you can
hear the result of the effect immediately. The name of the patch is also shown in the display on the channel strip:
Editing and saving Insert effects
Insert effects can be edited from their device panels in the Insert FX container in the channel’s rack device. You can
also assign device parameters to the four buttons and knobs on the Insert FX Programmer panel. These buttons and
knobs are mirrored on the Insert FX section of the channel strip.
Most of the Effect Combi patches already have a number of parameters assigned to the four buttons and knobs on
the Insert FX Programmer panel. These assigned parameters can be edited at any time from the Insert FX section in
the channel strip, and can also be automated on a Mix Channel/Audio Track in the sequencer.
To edit effect device parameters that are not assigned to the four knobs and buttons on the Insert FX Programmer
panel, you have to access the device(s) in the rack.
1. Click the “Edit Inserts” button to get to the channel’s Insert FX container in the rack.
The channel’s Insert FX container is scrolled into view, and unfolded, in the rack.
D Now, you can edit the effect device(s) parameters, just like for any other devices in the rack.
D To edit the parameter assignments on the Insert FX Programmer panel, click the “Show Programmer” button
on the Mix Channel/Audio Track device.
The parameter assignments are made in the same way as when creating/editing regular Combinator devices (see
“The Combinator”). The parameters you assign to the Insert FX Programmer panel in the rack are automatically
mirrored on the four knobs and buttons in the Insert FX section on the channel strip.