User Manual

THE MAIN MIXER
365
2. If you like, you can choose to save your effect device setup in the Insert FX container (with any parameter as-
signments) as an Effect Combi patch by clicking the “Save Insert FX Patch” button on the Programmer panel.
This will bring up the Patch browser, where you can select name and location for your Effect Combi patch.
! You don’t have to save your insert effect as an Effect Combi patch if you don’t want to. All settings are auto-
matically stored when you save the Song document.
Bypassing Insert effects
D Click the “Bypass” button at the top of the Insert FX section on the channel strip - or on the device in the rack
- to bypass the insert effects for the channel.
The “Bypass” buttons on the channel strip and on the device
Deleting Insert effects
Deletion of insert effects can be done either in the rack or with a mixer channel selected in the Main Mixer:
1. Select a Mix Channel or Audio Track device in the rack or a mixer channel in the Main Mixer.
2. Select “Clear Insert FX” from the Edit menu or context menu.
This will disconnect and delete all Insert FX devices of the selected channel.
Another way of deleting Insert FX is by manually removing them from the Insert FX container in the Mix Channel or
Audio Track device in the rack:
1. Unfold the Mix Channel/Audio Track device and click the “Show Insert FX” button.
2. Select the device(s) you want to remove in the Insert FX container.
3. Press [Backspace] or [Delete] - or select “Delete Devices and Tracks” from the Edit or context menu.
An alert appears asking you to confirm the deletion. (See “Deleting devices” for more details).
Copying and Pasting Insert effects between mixer channels
To copy an insert effect from one mixer channel and paste to another mixer channel, proceed as follows:
1. Select the mixer channel which contains the Insert effect you want to copy.
2. Select “Copy Channel Settings” from the Edit or context menu and then select “Insert FX” from the sub-menu.
If you select the Master Section, the “Copy Insert FX” item will appear directly on the Edit menu or context menu.
3. Select the mixer channel to which you want to paste the Insert effects and choose “Paste Channel Settings: In-
sert FX” from the Edit menu or context menu.
If you select the Master Section, the “Paste Insert FX” item will appear directly on the Edit menu or context menu.