Manualshelf

User Manual

ManualsBrandsPropellerhead ManualsAudio SoftwareRecord 1.5 PC / MAC - AUDIO PRODUCTION SOFTWARE
371372373374375376377378379380
Table Of Contents
THE MAIN MIXER
379
6. Finally, select the Mix Channel device as Input on the Audio Track.
This will route the signal from the Mix Channel device’s output directly to the input of the Audio Track.
The Mix Channel device selected as audio input on the Audio Track
Now, you can begin recording on the Audio Track according to the standard recording procedures described in
“General recording procedure”. The signal will be processed by the Insert FX of the Mix Channel device before be-
ing recorded on the track.
With this setup, you will always hear the sound of the input processed through the Amp device - just as if you had
a real hardware amp turned on and mic'd in the studio. If you don't want the "Lead Gtr Rec Input" Mix channel to
be heard, just mute it in the Main Mixer.
Creating a sub-mixer
By using the Direct Outs of the Audio Track and Mix Channel devices and routing the signals to a Mixer device you
can create a sub-mixer. A sub-mixer can be very useful for pre-mixing multi-mic’ed drums, or a horn section, for ex-
ample.