User Manual

SAMPLING (RECORD+REASON)
410
D Alternatively, click and hold the Sample button depressed for as long as you want to sample.
When you use the “click and hold” method, sampling will be automatically terminated as soon as you release the
mouse button. The sample will then end up in the device and on the Song Samples Tab in the Tool Window.
If you’re sampling into a Redrum, make sure you click/hold the Sample button for the desired drum channel.
A waveform display shows up with a moving “play head”:
3. Start playing or singing what you want to sample.
As soon as any audio is present on the Sampling Inputs on the Hardware Interface, the waveform display will indi-
cate this by drawing a wave.
! The buffer size for sampled audio is 30 seconds. After 30 seconds, the play head will start over again from the
beginning and start erasing any previously sampled audio.
D If you want to restart the sampling manually, click the Restart Sampling button:
The “Restart Sampling” button
This will erase any sampled audio and force the play head to restart from the beginning.
! Note that you cannot restart sampling this way if you use the “click and hold” sampling method.
4. When you’re satisfied with your recording, click the Stop Sampling button in the waveform display.
The “Stop Sampling” button
The waveform display closes and the sample automatically ends up in the device, where you can play it back instantly:
Play head