User Manual

REMOTE - PLAYING AND CONTROLLING DEVICES
457
2. Pull down the Surface pop-up from at the top of the dialog and select the control surface you wish to lock to a
device.
3. Next, open the “Lock to device” pop-up menu.
On this pop-up, all devices in the current song are listed. The “Follow Master Keyboard” item which is selected by
default, means that the control surface isn’t locked (it instead follows the Master Keyboard Input in the sequencer).
4. Select the device you wish to lock to the selected control surface from the list.
D If the selected control surface supports keyboard shortcuts for selecting mapping variations (see “About map-
ping variations”) an additional “Always use Mapping” pop-up appears.
On this pop-up you can set whether you wish to lock a specific standard mapping variation or whether the device
should switch mapping variations according to keyboard shortcuts. If the former is the case, select the mapping
variation from the list. If the latter is the case, select “Follow Keyboard Shortcut”.
5. Close the dialog when you are done.
The device is now locked to the selected control surface. In Remote Override Edit mode (see “Activating Remote
Override Edit mode”) a locked device is shown with a lock symbol in the upper left corner of the device panel.
q It’s also possible to lock a control surface to the ReGroove Mixer (see “The ReGroove Mixer”) to control its pa-
rameters via Remote!