User Manual

COMMON OPERATIONS AND CONCEPTS
46
Scrolling with the Hand tool
Scrolling with the Hand tool in the Rack
In the Rack and Sequencer, you can also use the Hand tool for scrolling the view.
1. In the Rack, place the pointer on either of the wooden side panels of a rack column.
The pointer will switch to a hand symbol.
2. Click and drag the rack vertically and/or horizontally to scroll in the rack, as shown in the picture above.
If you are using only a single rack column, it’s only possible to scroll vertically.
In the Sequencer you have to manually switch to the Hand Tool by selecting it from the sequencer Toolbar. With the
Hand Tool selected, you can scroll in any direction on the Edit/Arrangement Pane. Refer to “Hand Tool” for more in-
formation.
Zooming in the Sequencer
In the Sequencer it’s possible to zoom in and out using the Track Navigator and Song Navigator. You can also use the
Magnifying Glass Tool on the Sequencer Toolbar - see “Magnifying Glass Tool”.
q See also “Scrolling and zooming using a wheel mouse”.
Zooming vertically in the Sequencer
D To zoom in vertically in the Sequencer arrangement, and thus increase the Track height, click on the “+” mag-
nification button below the Track Navigator:
Increase the Track height by clicking the + magnification button below the Track Navigator
D To zoom out vertically, click on the “-” magnification button.
• When the Sequencer is in Edit Mode, individual vertical zoom controls become available.