User Manual

REMOTE - PLAYING AND CONTROLLING DEVICES
460
D Note that you can select the Transport Panel as well!
Most items on the Transport panel can be mapped to controls. Note that by selecting the Transport panel any
standard mapping will be shown automatically, unlike other devices where you have to first direct Master Keyboard
input to the device from the sequencer.
D If you point on a standard mapped parameter, a tooltip appears showing which control on the control surface
device the parameter is mapped to.
Remote Override mapping
If Remote Override Edit Mode is enabled you can use the following methods to map a parameter to a control:
Method 1:
1. Select the parameter you wish to map.
The arrow (or knob) changes to orange, indicating it is selected.
2. Select “Edit Remote Override Mapping...” from the Edit menu.
You can also right-click (Win) or [Ctrl]-click (Mac) on the parameter to select the same item from the context
menu.
The “Edit Remote Override Mapping” dialog opens. From here you have two ways to proceed:
D Either manually select the control surface and the control you wish to map the parameter to from the two cor-
responding pop-ups.
The Control Surface pop-up lists all installed control surface devices, and the Controls pop-up lists all the mappa-
ble controls for the selected control surface.
D Or you can activate “Learn From Control Surface Input” and simply move (or press) the control you want to
map the parameter to.
The “Control Surface Activity” field momentarily flickers as you turn the knob, and then the dialog shows the con-
trol surface and control it is mapped to.
D If the control surface has a keyboard, you can also select keys as controls.
Keys work just like on/off buttons. If “Keyboard” is selected from the Controls pop-up, a Note Number field ap-
pears in the dialog.