User Manual

REMOTE - PLAYING AND CONTROLLING DEVICES
463
Additional Remote Overrides...
On the Options menu there is an item named “Additional Remote Overrides...”. Selecting this opens a dialog with re-
mote functions that cannot be assigned using Remote Override Edit mode, such as switching target tracks, Undo/
Redo etc.
Although most of the items in this dialog are self-explanatory, some need to be described. These are as follows:
Target Track Delta and Target Previous/Next Track
D Target track is the track with Master Keyboard Input.
Assigning Target Previous/Next Track to two Button controls on a control surface allows you to move the Master
Keyboard Input symbol up or down in the Track list.
D Target Track Delta is meant to be used with Delta wheel controllers (a special control with no min/max range)
to switch target track.
A Mackie Jog wheel is an example of this type of controller.
D Select Previous/Next Track can be assigned to standard button controls.
Select Patch for Target Device and Select Previous/Next Patch for Target Device
The target device is the device connected to the target track.
D Patch selection is usually standard-mapped to buttons on a control surface.
If you wish to override this standard patch selection mapping for devices globally to select patches for any patch
device that currently has Master Keyboard Input, you can assign this here.
For example, you may always want to use the same buttons on a specific control surface for selecting patches.
D Select Patch for Target Device is also meant to be assigned to a Delta-type control (see above).
This allows you to select patches for a device connected to the target track by spinning the wheel clockwise or
anti-clockwise.
D Select Previous/Next Patch can be assigned to standard button controls.