Manualshelf

User Manual

ManualsBrandsPropellerhead ManualsAudio SoftwareRecord 1.5 PC / MAC - AUDIO PRODUCTION SOFTWARE
501502503504505506507508509510
Table Of Contents
THE COMBINATOR
510
2. Click in the Target column for the Rotary or Button control you wish to assign a parameter.
On the pop-up that appears, all the available parameters for the device are listed.
3. Select the parameter you wish to assign to the control.
The parameter is now assigned, and the name of the parameter is shown in the Target column for the correspond-
ing control.
4. If you wish the selected device to receive notes this option should be checked.
5. If you move or press the assigned Rotary or Button it will now control the parameter you assigned to it.
6. You can specify a range for the parameter by clicking in the Min and Max columns and moving the mouse up
or down.
By default the maximum available range is set.
7. If you select another device in the Device list to the left, you can assign another parameter to the same Rotary
or Button control using the same basic method.
This means that you can create multi-function controls that operate simultaneously on several parameters. E.g. if
you have two Subtractors and a Malström in a Combi you could create a “master” filter cutoff knob, that controls
this parameter for all three devices.