User Manual

SUBTRACTOR SYNTHESIZER
(RECORD+REASON)
554
Modulation Inputs
! Remember that CV connections will not be stored in the Subtractor patch, even if the connections are to/from
the same Subtractor device!
These control voltage (CV) inputs (with associated voltage trim pots), can modulate various Subtractor parameters
from other devices, or from the modulation outputs of the same Subtractor device. These inputs can control the fol-
lowing parameters:
• Oscillator Pitch (both Osc 1 & 2).
• Oscillator Phase Offset (both Osc 1 & 2).
•FM Amount
• Filter 1 Cutoff
• Filter 1 Res
• Filter 2 Cutoff
•Amp Level
•Mod Wheel
Modulation Outputs
The Modulation outputs can be used to voltage control other devices, or other parameters in the same Subtractor de-
vice. The Modulation Outputs are:
•Mod Envelope
• Filter Envelope
•LFO 1
Gate Inputs
These inputs can receive a CV signal to trigger the following envelopes. Note that connecting to these inputs will
override the normal triggering of the envelopes. For example, if you connected an LFO output to the Gate Amp input,
you would not trigger the amp envelope by playing notes, as this is now controlled by the LFO. In addition you would
only hear the LFO triggering the envelope for the notes that you hold down. The following Gate Inputs can be se-
lected:
•Amp Envelope
• Filter Envelope
•Mod Envelope