User Manual

THOR POLYSONIC SYNTHESIZER
(RECORD+REASON)
556
Introduction
Thor is an advanced synthesizer with many unique features.
The design could be described as semi-modular, in that the oscillator and filter sections are open slots that allow the
user to select between various different oscillator and filter types, each with a distinct character. Some of these de-
signs were inspired by selected vintage equipment.
As a result, Thor is capable of producing an astounding array of sounds.
While it offers a lot of scope for serious sound modelling, it still has a basically simple and user-friendly interface.
In the extensive Modulation bus routing section both audio and control signals (CV) co-exist, and more or less any
routing combination can be assigned. Use audio to modulate a CV signal or vice versa - Thor’s modulation capabilities
are virtually limitless.
Thor also features an advanced step sequencer which can be used for creating melody lines or purely as a modula-
tion source.
There are also audio inputs on the back panel. By connecting the output of another device to these inputs, you can
use Thor’s filters, envelopes etc. to process the sound, or you can use the external audio source to modulate a Thor
parameter.
About basic synthesizer terminology
This chapter assumes familiarity with common synth terminology like oscillators, waveforms, filters and envelopes. If
you are new to Reason (or these terms), you may want to read the “Subtractor Synthesizer (Record+Reason)” chap-
ter first, where these elements and how they interact are described from a more basic point of view.
Loading and Saving Patches
Loading and saving patches is done in the same way as with any other Record or Reason device - see “Loading
patches” and “Saving patches”.