User Manual

NN-19 SAMPLER
(RECORD+REASON)
627
Selecting Key Zones
Only one key zone can be selected at a time. A selected key zone is indicated by a light blue (as opposed to dark
blue) strip above the keyboard in the display. There are two ways you can select key zones:
D By clicking on a non-selected key zone in the display.
D By activating the “Select Key Zone via MIDI” button.
Playing a note belonging to a non-selected key zone from your MIDI keyboard, will select the key zone it belongs
to.
Setting the Key Zone Range
! Key zones cannot overlap.
When you adjust the boundaries of a key zone, the surrounding boundaries are automatically adjusted accordingly.
You can change the key zone range in the following ways:
D By dragging the “handle(s)” which divides the key zones, you can change the range of the selected key zone.
In the case of having two key zones split in the middle, you could thus change the lower limit for the upper (new)
key zone and the upper limit for the original key zone.
D By using the “Lowkey” and “Highkey” knobs to set a lower and upper range, respectively.
Deleting a Key Zone
D To delete a key zone, select it and then select “Delete Key Zone” from the Edit menu.