User Manual

NN-XT SAMPLER
(RECORD+REASON)
666
Moving Zones by Dragging the Zone Boxes
You can also move entire zones horizontally, thereby changing their key ranges.
1. Select all the zones you want to move.
You can move several zones simultaneously.
2. Point on any of the selected zones, and press the mouse button.
3. Drag left/right and release the mouse button.
Dragging multiple zones.
Moving Zones by Dragging in the Tab Bar
You can also move a zone by dragging anywhere between the zone boundary handles on the tab bar. When you do,
the surrounding zones will be affected just as when dragging the boundary handles in the tab bar (see above).
This can be used to “slide” a zone in relation to its surrounding zones, as the picture example below shows (before
and after dragging).
About the Lock Root Keys function
Normally, when you move zones (as described above), the root note of the zone(s) you move will change accordingly.
In other words, the zone(s) will be transposed. If this is not desired, you can activate the Lock Root Keys function prior
to moving the zone(s) by clicking on the button above the key map display.
Moving zones without changing their root notes can be used for some interesting effects, since it will completely
change the timbre of the sample(s) as they are played back.