User Manual

NN-XT SAMPLER
(RECORD+REASON)
674
Crossfading Between two Sounds
An example:
• Two zones are both set to play in the full velocity range of 1-127.
• Zone 1 has a fade out value of 40.
This means that this zone will play at full level with velocity values below 40, With higher velocity values, it will grad-
ually fade out.
• Zone 2 has a fade in value of 80.
This has the effect that as you play velocity values up to 80, this zone will gradually fade in. With velocity values
above 80, it will play at full level.
Another example:
Crossfading can be used to only fade in or fade out a certain sound. One common example is to set things up so that
one sound plays the entire velocity range and another is faded in only at high velocity values.
• Zone 1 is set to play the entire velocity range with no crossfade.
• Zone 2 is set to play the velocity range 80 to 127, with a fade in value of 110.
This means that this zone will start fading in from velocity values 80 and will play at full level in the velocity range
110 to 127.
This can be used for example to add a rimshot to a regular snare sound or a harder attack to a softer violin sample.
0
40
20
60
100
80
127
Velocity
Zone 1
Zone 2
0
40
20
60
100
80
127
Velocity
Zone 1
Zone 2