User Manual

NN-XT SAMPLER
(RECORD+REASON)
684
The Filter section
Filters can be used for shaping the character of the sound. The filter in NN-XT is a multimode filter with six different
filter types.
D To activate/deactivate the filter, click the On/Off button in the top right corner.
When the filter is activated, the button is lit.
Filter mode
To select a filter mode, either click the Mode button in the bottom right corner or click directly on the desired filter
name so that it lights up:
•Notch
The notch filter is used for cutting off frequencies in a narrow frequency range around the set cutoff frequency,
while letting the frequencies below and above through.
•HP 12
This is a highpass filter with a 12 dB/Octave roll-off slope. A highpass filter cuts off low frequencies and lets high
frequencies pass. That is, frequencies below the cutoff frequency are cut off and frequencies above it pass
through.
• BP 12
This is a bandpass filter with a 12 dB/Octave roll-off slope. A bandpass filter could be viewed as the opposite of
a notch filter. It cuts off both the high and the low frequencies, while frequencies in the band range pass through.
•LP 6
This is a lowpass filter with a gentle, 6 dB/Octave slope. A lowpass filter is the opposite of a highpass filter. It lets
the low frequencies through and filters out the high frequencies. This filter has no Resonance.
•LP 12
This is a lowpass filter with a 12 dB/Octave roll-off slope.
•LP 24
This is a lowpass filter with a fairly steep roll-off slope of 24 dB/Octave.