User Manual

NN-XT SAMPLER
(RECORD+REASON)
691
• Filter Resonance
•LFO 1 Rate
•Master Volume
•Pan
• Modulation Wheel
• Pitch Wheel
Gate Input
These inputs can receive a CV signal to trigger the following envelopes:
• Amplitude Envelope
• Modulation Envelope
Note that connecting to these inputs will override the normal triggering of the envelopes. For example, if you connect
a Matrix Gate Out to the Gate In Amp Envelope, you would not trigger the amp envelope by playing notes, as this is
now controlled by the Matrix Gate Out. In addition you would only hear the Gate Out triggering the envelope for the
notes that you hold down.
Audio Output
There are 16 audio output jacks on the NN-XT’s back panel - eight separate stereo pairs . When you create a new
NN-XT device, the first output pair (1L & 2R) is auto-routed to the first available channel on the audio mixer.
The other output pairs are never automatically routed. If you wish to use any of the other output pairs, you have to
manually connect them to the desired device - typically a Mix Channel device. The basics on Routing is described in
“Routing Audio and CV”.
! Note that when you use any other output pair than the first, you also have to route one or more zones to it if
you want it to actually output sound, since all zones by default are routed to outputs 1 & 2. How to route zones
to other outputs is described in the “Out” section.