User Manual

REDRUM DRUM COMPUTER
(RECORD+REASON)
726
Pattern Shuffle
Shuffle is a rhythmic feature, that gives the music a more or less pronounced swing feel. It works by delaying all six-
teenth notes that fall in between the eighth notes. You can activate or deactivate shuffle individually for each Redrum
pattern by clicking the Shuffle button on the device panel.
The amount of shuffle is set globally with the Global Shuffle control in the ReGroove Mixer - see “The ReGroove
Mixer”.
Flam
A flam is when you double-strike a drum, to create a rhythmic or dynamic effect. Applying flam to a step entry will add
a second “hit” to a drum sound. The flam amount knob determines the delay between the two hits.
To add a flam drum note, proceed as follows:
1. Activate flam by clicking the Flam button.
2. Click on a step to add a note (taking the Dynamic setting into account as usual).
A red LED is lit above the step to indicate that flam will be applied to that step.
3. Use the Flam knob to set the desired amount of flam.
The flam amount is global for all patterns in the device.
D To add or remove flam to or from an existing step note, click directly on the corresponding flam LED.
You can also click and drag on the LEDs to add or remove several flam steps quickly.
D Applying flam to several consecutive step entries is a quick way to produce drum rolls.
By adjusting the Flam knob you can create 1/32 notes even if the step resolution is 1/16, for example.