User Manual

REDRUM DRUM COMPUTER
(RECORD+REASON)
730
Redrum parameters
Drum sound settings
Redrum features ten drum sound channels that can each be loaded with a Wave or AIFF sample or a sample from a
SoundFont bank. Although they are basically similar, there are three “types” of drum sound channels, with slightly dif-
ferent features. This makes some channels more suitable for certain types of drum sounds, but you are of course free
to configure your drum kits as you like.
On the following pages, all parameters will be listed. If a parameter is available for certain drum sound channels only,
this will be stated.
Mute & Solo
At the top of each drum sound channel, you will find a Mute (M) and a Solo (S) button. Muting a channel silences its
output, while Soloing a channel mutes all other channels. Several channels can be muted or soloed at the same time.
You can also use keys on your MIDI keyboard to mute or solo individual drum sounds in real time.
D The keys C2 to E3 (white keys only) will mute individual drum channels starting with channel 1.
The sounds are muted for as long as you hold the key(s) down.
D The keys C4 to E5 (white keys only) will solo individual drum channel, starting with channel 1.
The sounds are soloed for as long as you hold the key(s) down.
This is a great way to bring drum sounds in and out of the mix when playing Record live. You can also record the
drum channel Mutes in the main sequencer, just like any other controller (see “Recording parameter automation”).
The Effect Sends (S1 & S2)
On the back panel of Redrum you will note two audio connections labeled “Send Out” 1 and 2. When you create a
Redrum device, these will by default be auto-routed to the first two “Chaining Aux” inputs on the Mixer device (pro-
vided that these inputs aren’t already in use).
This feature allows you to add effects to independent drum sounds in the Redrum.
C2 C3 C4 C5
1 23 45 6 78910 1 2345 6 78910
Mute Solo